If you have been wanting to dive into the craft of woodworking, then you have probably thought quite a lot about how to get started. It can be hard when you don’t know what you’re doing in the beginning, but trial and error account for a lot. Woodworking is an intricate topic; keep reading to find out all about it.
Make sanding blocks that are reusable. Start by cutting six blocks from scrap 3/4″ plywood for every sandpaper grit you generally use. Each block should be about 2 inches by 4 inches. You can secure the sandpaper better with an adhesive. If the cork is too large, trim it with a utility knife. Use spray glue on sandpaper and stick it to the block. Then cut the sandpaper that is flush with the cork and label the blocks.
Test your stains on scraps of wood or inconspicuous areas of the piece you’re using. This will prevent you from getting an unwanted stain color on your final product. Wood is unpredictable so you’ll want to test it first.
When renting tools that you are unfamiliar with, speak with the company about getting a lesson on how to use it. Quite often, they’ve got specialists available that can help you get comfortable with the tool faster than if you learned it on your own. Also inquire if they have any literature that includes tips on how to use the tool.
Tin snips can help you better trim laminate when doing your wood projects. Tin snips are a great way to cut or trim the laminate into the size you want. Using them only for this laminate also helps keep them sharp.
Before purchasing or using any type of wood, you should know all about it. Some woods are only paint grade, while stain grade woods are much better for staining. When it comes to veneer and particle board, veneer doesn’t usually absorb the right amount of stain, and particle board absorbs way too much. Choosing the correct piece of wood helps turn the project you work into something special.
Keeping a ruler in a pocket can be a good idea, however sometimes it can be frustrating if it falls out. Try switching to a metal ruler, keeping it in a pocket with your telescoping magnet, the kind used to reach and pick up screws or nails. The magnet will keep them both firmly inside your pocket.
If you have loose interior door hinges to work on, you may be able to just use a golf tee to help. Take the door and hinges off the frame, and lightly hit a golf tee down into every screw hole. Get rid of the excess part of the tee by cutting it and put the door back up. This gives the screw a more solid base to grip into.
Woodworking is an interesting type of art. With any luck, the above article has given you some suggestions that you can take into the shop with you. Whether you want to create wooden toys, fancy furniture, or intricate sculptures, then now is the time to have a go at it. You may surprise yourself!