Tag: woodworking

March 29, 2019 Suzana Mikolova 0 Comments

If you have hesitated to try working with wood because it seems hard, you need to think again. As with any craft, a beginner has to start somewhere. A willing spirit and an eagerness to learn is all that is needed to learn the art of woodworking. The following article will give you some of the information you’re going to need to begin working with wood today.

Try making reusable sanding blocks by yourself. You will need three-quarter-inch plywood cut into six blocks. Be sure to create a block for each of the sandpaper grits you typically use. Each block should be about 2 inches by 4 inches. Spray some adhesive on your blocks and on the cork tile. Trim the cork so that it is flush around the edges of the block. You can then spray adhesive on some sandpaper and place it on the corks. Finally, trim the sandpaper and label each block.

Stir finishes or stains before using them. Stains often have ingredients that settle to the bottom. However, if you shake it, it may create bubbles and not allow the product to mix well. Make sure that the product is thoroughly stirred, and everything is evenly dispersed.

When creating your budget, never forget to add the each new tool that you will have to purchase. It is easy to miss the extra expense when you are too busy thinking about the cost of the wood. Everything you need should go on your list, so that your budget is truly representative of your costs.

If you’re thinking of leasing a new tool you’ve never used, see if the company can teach you how it works. Many times, they have specialist that can give you some great instruction. If you ask, they might have a list available with some other tips to help you later.

Try dry fitting wood before you glue it. You don’t want any surprises when you do actually have to apply the glue. You’ll be prepared. A dry-fit will give you a good idea of what components go where.

Every shop that does woodworking needs to contain a stair gauge. These are usually used for laying out stair jacks; however, you can also use it to clamp down your carpenter’s square. It will convert a carpenter’s square into your guide for the circular saw. Using this square will allow you to make cuts that are straight.

Before you even begin sawing anything, check the blade to make sure it’s in good condition. Dull blades rip wood apart. A dull blade will also cause you to make mistakes and harm the wood that you’re working with.

Get your grip ready for use in advance. Sometimes you might need a spring clamp, however you only have one hand available to use. It can very hard to open these up just using one hand. There is of course, one way to make that simpler. Before you apply the glue, open the clamps you need and place them on scrap wood using both hands. This makes them near the maximum capacity so they’re easier to use with one hand.

There, now you have the right information about woodworking. Take what you’ve learned to increase your skills and make cool things. When you continue to read articles like these, your knowledge will continue to grow. Keep this information on hand so that you always have it. Go now and enjoy yourself!…

September 24, 2018 Suzana Mikolova 0 Comments

It is fun to start working with wood. There is a lot of information associated with this field. Instead of making this something you worry about, try taking things step by step. You will find information to help in the article below.

As with anything involving power tools, safety is the number one concern in woodworking. Proper tool use and safety equipment are important when you are woodworking. Don’t ever remove the guards from your power tools; they are in place for your protection. You do not want to start a woodworking project and end up in the hospital.

Prepare your finishes and stains by stirring them instead of shaking them. Stir often because these stains settle over time. Shaking too much can cause bubbling to occur, and also prevent it from mixing well. Be sure to continue stirring until everything that has settled is blended in evenly.

Be realistic about your budget. It is easy for your eyes to be larger than your wallet. It is important to have all of the items fit in your budget. If you research this prior to starting, you can avoid this type of disappointment.

If you rent a tool that is unfamiliar, ask the rental company to give you a quick tutorial. Quite often, they’ve got specialists available that can help you get comfortable with the tool faster than if you learned it on your own. Also ask if they have a user’s guide for it.

Dry fit your project together before beginning to glue. You could cause damage if you tinker with the fit after you’ve applied the glue. Dry fitting your pieces will show you how the components fit together.

Understand the characteristics of the woods you’re using. Woods can differ substantially. Different woods take stain differently. Different cuts of wood will also splinter differently. And, you will notice a plethora of grains. All of this will become factors in your woodworking project.

A golf tee is all you need to fix door hinges which are loose. Just take the door off the hinges and tap the golf tee into the offending screw hole. Cut the golf tee off flush with the surface and put the door back on the hinges. The golf tee gives the screw something to bite into.

Add some extra spring to your grip. You might need to use spring clamps, but you may only have one free hand. Opening these with only one hand can be difficult. You can make this easier. Before gluing anything, first put clamps on scraps of wood. This makes it possible to use them with only one hand when you need to.

Wear ear protection. Woodworking equipment can be very noisy. In fact, staying in one without ear protection for long durations can lead to hearing loss. Get a pair of inexpensive ear plugs, or buy a great pair of noise canceling headphones. Whichever you use, make sure to use them religiously.

With the information presented here, you can get off to a good start in woodworking. Always seek ways to gain a greater understanding of woodworking, and hopefully you will enjoy the many new projects that you create in the future. See what you’re able to make with wood!…

August 11, 2018 Suzana Mikolova 0 Comments

Every once in a while you will run into situations where you have to better your skills. When doing work, you may wish to get into an on-sight training program or doing a course. Find resources such as this article to help you. If you’re a lover of woodworking, you’ll be a fan of the tips below.

Never shake a finish or a stain. Only stir them. Stir often because these stains settle over time. However, if you shake it, it may create bubbles and not allow the product to mix well. Stir thoroughly until it is smooth and even.

Dry fit your wood before using glue. You don’t want any surprises when you do actually have to apply the glue. You’ll be prepared. Using dry-fit will show you where to put the pieces should go.

Every shop that does woodworking needs to contain a stair gauge. They are used often to layout jacks for stairs, but they can also be clamped to your carpenter’s square. You can then use your square as a guide for a circular saw. Using this square will allow you to make cuts that are straight.

Be certain you have the right protection for your ears. Woodworking machinery is very noisy. Prolonged exposure to it can result in some loss of hearing. You can get throwaway ear plugs or you can buy expensive headphones. Whatever your choice, make sure you are wearing the protection when you are using the machinery.

Keep an eye out for recycled wood. Scraps can be discarded which are a boon for your projects. Home improvement stores, floor shops, and places that are similar are going to throw away good wood sometimes. You can use this wood for your projects. This can produce real savings.

Always employ safety practices when using a table saw. When executing a crosscut, set the length for the cut by clamping a wooden block to the fence. This will help prevent slippage or movement of your board. By utilizing this strategy, your board end will not spring back, allowing you to cut.

Keep a lookout for old furniture that people are going to throw out. People can be throwing away furniture that you can get wood from for free. Stop to think about other prospects before pushing aside what you’re seeing. You may be able to salvage the drawers of an unusable dresser and re-purpose them as bookshelves.

A good circular saw guide is a stair gauge. Usually they are used for matching up the notches and the run and rise of stair jacks. However, using both on the carpenter square tongue, you will have a useful guide when using the circular saw.

You have to be patient. Frustration can come when projects don’t go according to plan. Understand that the finished piece exists in the wood, but you have to release it. Be patient. It will keep you focused and help you keep working. Then, you can complete your piece!

We all have to work hard to become better at what we do. Woodworking is a trade that you can develop skills in with practice. With these tips in hand, you can get started on your very next project and surprise yourself with what you can actually make.…

June 26, 2018 Suzana Mikolova 0 Comments

You can achieve great things by bettering your woodworking skills. When it comes to work, you may complete a course or on-site training. When you’re doing it as a hobby, you may be able to figure it out by yourself. If you love woodworking, then the tips below will help you get even better at it.

Consider doing a dry fitting of your pieces before you use glue to join these together. You don’t want any surprises when you do actually have to apply the glue. You’ll be prepared. A dry-fit will give you a good idea of what components go where.

Your woodworking shop needs a stair gauge. These are usually used for laying out stair jacks; however, you can also use it to clamp down your carpenter’s square. This will make them into guides for a circular saw. You can always make perfectly straight cuts by using this method.

Get your grip ready for use in advance. A spring clamp may be useful sometimes, but only if you can use more than one hand. These are tough to open up with a single hand. There is an easier way. Before you start the glue process, with your free hands place the clamps on a piece of random scrap wood. This will put them close to the jaw size for your piece, so you will not fumble around as much.

Protect your ears. The machinery gets very noisy. Exposure over time can mean you lose some of your hearing. You can either purchase a high quality set of headphones or use disposable ear plugs. You must remember to use them every time you operate noisy equipment.

Lighting is important within your work space. Woodworking is a hobby that requires great accuracy when measuring. Also, sharp tools are involved in this craft. You also have to see well too or else you could get injured or make other mistakes.

Check out Craigslist and estate sales to find great supplies. You can find some high-quality used stuff. This will save you a lot of money when you are just starting or need to replace something.

Choose the right wood for the job. Don’t use pine for things like table tops because it scratches easily. Each wood will have its own color when finished, too.

Keep an eye out for used furniture that you could pick up. Often, you can find pieces of wood furniture that are free of charge or very cheap. Consider what you can do before you dismiss anything. Maybe the dresser might be too short for the hope chest, but a simple rearranging of the drawers could turn the piece into something artistic.

There are several important hand tools you need before starting a woodworking project for the first time. The first tool you need to get is a hammer. Choose a claw hammer for the best results. Pick them up to find the one that feels good in your hand. Avoid purchasing a hammer that’s too heavy.

We all need to strive to better ourselves at every turn. Whatever your interests, from cooking to woodworking, expert advice always helps. With these tips in hand, you are ready to get started.…

June 14, 2018 Suzana Mikolova 0 Comments

The skills of working with wood are learned. While it can seem daunting at first, by studying and practicing, it is possible to acquire staggering woodworking skills. The best way to sharpen your skills in woodworking is to get educated. You have to learn some of the best tips on woodworking and then do your best to apply the things you’ve learned. Keep reading to learn more.

You should always test stain on a small area or on a wood scrap. If you test the stain color first, you will not have any unpleasant surprises. This will go a long way in preventing disappointment.

Use tin snips to trim laminate for your projects. Tin snips are going to let you cut your laminate quickly and without much effort so that you can use it. If you get some tin snips just for cutting laminate, they will stay sharper.

Every woodworking shop should have a stair gauge in it. This is used for laying out stair jacks and can also be used to clamp a carpenter’s square. This will turn your square in to a circular saw guide. When you use the square, every cut will be perfect.

Many people have a small ruler on them when working in the shop. Sometimes it will fall out of your pocket when you move around. Get a metal one and keep it in the pocket that has the little telescoping magnet for picking up loose screws. The magnet will keep the ruler safely in your pocket.

Know your wood. Each type is different. They all react differently when you apply stain. Splintering varies among cuts. Different grains will be found on each. All of these factors have an effect on your wood project.

Before beginning to cut any wood, ensure your blade is sharp and in good working order. If you allow a saw blade to become dull, you will have a tough time sawing with it. It can also cause errors that will cost you a ton, depending on the wood type you use.

Choose the correct nails when starting a project. A large diameter nail can split the wood and ruin your project. If the nail is too small, it cannot provide enough strength to keep the wood together. It’s important to be able to match the correct size of nail for each job.

Do you sometimes find a screw that needs tightening, but is in an awkward place where you can’t reach with the screwdriver and your hand? This is where your toolbox comes in handy. Just grab a 12-point socket set. Use the socket to place on a screwdriver, and then attach it to a ratchet.

Look for recycled wood. There are a lot of places that have scraps for you to use. Some places include big box stores, other woodworkers and floor shops. Use this to your advantage and see if they have something you can use for your project. This can produce real savings.

Anyone can learn woodworking. The real trick is to keep learning all you can about woodworking. Using this advice will help you master working with wood.…

April 22, 2018 Suzana Mikolova 0 Comments

If you have been wanting to dive into the craft of woodworking, then you have probably thought quite a lot about how to get started. It can be hard when you don’t know what you’re doing in the beginning, but trial and error account for a lot. Woodworking is an intricate topic; keep reading to find out all about it.

Make sanding blocks that are reusable. Start by cutting six blocks from scrap 3/4″ plywood for every sandpaper grit you generally use. Each block should be about 2 inches by 4 inches. You can secure the sandpaper better with an adhesive. If the cork is too large, trim it with a utility knife. Use spray glue on sandpaper and stick it to the block. Then cut the sandpaper that is flush with the cork and label the blocks.

Test your stains on scraps of wood or inconspicuous areas of the piece you’re using. This will prevent you from getting an unwanted stain color on your final product. Wood is unpredictable so you’ll want to test it first.

When renting tools that you are unfamiliar with, speak with the company about getting a lesson on how to use it. Quite often, they’ve got specialists available that can help you get comfortable with the tool faster than if you learned it on your own. Also inquire if they have any literature that includes tips on how to use the tool.

Tin snips can help you better trim laminate when doing your wood projects. Tin snips are a great way to cut or trim the laminate into the size you want. Using them only for this laminate also helps keep them sharp.

Before purchasing or using any type of wood, you should know all about it. Some woods are only paint grade, while stain grade woods are much better for staining. When it comes to veneer and particle board, veneer doesn’t usually absorb the right amount of stain, and particle board absorbs way too much. Choosing the correct piece of wood helps turn the project you work into something special.

Keeping a ruler in a pocket can be a good idea, however sometimes it can be frustrating if it falls out. Try switching to a metal ruler, keeping it in a pocket with your telescoping magnet, the kind used to reach and pick up screws or nails. The magnet will keep them both firmly inside your pocket.

If you have loose interior door hinges to work on, you may be able to just use a golf tee to help. Take the door and hinges off the frame, and lightly hit a golf tee down into every screw hole. Get rid of the excess part of the tee by cutting it and put the door back up. This gives the screw a more solid base to grip into.

Woodworking is an interesting type of art. With any luck, the above article has given you some suggestions that you can take into the shop with you. Whether you want to create wooden toys, fancy furniture, or intricate sculptures, then now is the time to have a go at it. You may surprise yourself!…

July 27, 2017 Suzana Mikolova 0 Comments

It is not easy to perfect your woodworking craft. It involves a lot of hard work, dedication and learning about new and better woodworking business practices. The tips below will help you make money at what you love doing. Read this carefully and use this advice to your advantage.

Before you begin, have a budget in place so you will know the limits of your project. It is quite common to be far more ambitious than the budget allows when working on a particular project. You begin a project only to realize that you are starting to run out of money. Do your homework in advance and select projects that you know you can finish.

When creating a budget, don’t forget to itemize any new tools that you’re going to need to buy. It’s too easy to overlook this. But, if new tools or materials will be required, your budget may be exceeded quickly.

No woodworking shop should be without a stair gauge. They are typically used for laying out stair jacks, but they can also be used as a clamp for a carpenter’s square. This can make a carpenter’s square serve as a guide for a circular saw. When you use this square, you’ll cut perfectly straight every time.

Be sure you have the right kind of ear protection. The machines and tools you use will be noisy. If you ignore this and don’t use protection, you can easily find yourself with some hearing loss before you know it. Get some cheap ear plugs or high-quality headphones that block out noise. Whatever you go with, be sure you’re wearing them when using the loud machinery.

When you use the table saw, be safe. If you are crosscutting, use a clamped block to mark the cut length. This is safer and prevents board movement. If you clamp, keep the board end open so you can cut.

Keep on the lookout for friends that are selling their house. You can earn some extra money by using your skills to increase their house’s resale value. Maybe you can build a new mailbox for them, or even refurnish a kitchen.

You can’t tell when something will get into your eyes. Keep your eyes on the machine that you are working with at all times. If your goggles don’t fit well or provide clear eyesight, find the pair that do.

Practice patience. It is not uncommon for people to get worked up when they feel that their project is taking too long. When this happens, remember that the wood you are working with contains your finished piece. Be patient and stay focused on your work. Your project will be finished before you know it.

Plan everything on paper first. When you take the time to write down your materials, you can analyze your costs before you begin and have more control over you budget and project. Also, it will help you to reduce the amount of wood that you waste. Proper planning will keep the project going smoothly.

As was mentioned in the above article, being a successful woodworker takes effort and dedication. Learn from others and read more tips you find online or at the library. Apply the advice in this piece and keep your woodworking business going strong.…